Graphic Wall introduces a collection of contemporary ceramic wall tile designs offering a twist on traditional wall decoration through repeating patterns and ‘pop’ colour schemes.
Graphic Wall products are designed for use in commercial and residential buildings and are suitable for use on interior and exterior walls (see below for suitability). Since their launch in 2008, Graphic Wall ceramic wall tiles have featured in Interior Design magazine (April 08), BD magazine (May 08) and Idfx magazine (May 08)
Graphic Wall ceramic wall tiles are available in 5 sizes, which are suitable for different environments and are produced on a made-to-order basis. For internal walls and areas not subjected to frost the 100x100mm, 150x150mm, 200x100mm and 200x200mm are recommended. The 200x200mm and 125x250mm are available in a frost resistant finish, making them suitable for external application. The 200x200mm tile is suitable for use as external cladding and the 125x250mm is intended for use in swimming pools and comply with BS/EN guidelines on swimming pool ceramics. The frost resistant products have a high impact resistance meaning marker pen and spray paint graffiti can be removed easily. Customers are advised to request frost resistant finish when ordering for outdoor use, this can be done during the ordering process in the ‘notes’ panel.
Graphic Wall ceramic wall tiles perform as a standard glazed wall tile and should be cleaned as such. As with all glazed wall, swimming pool and cladding tiles abrasive cleaners should not be used. For general maintenance tiles can be cleaned using a sponge or cloth and warm water to which a neutral, low sulphate detergent can be added. Tiles should be rinsed with cold water to remove detergent solution.
Graphic Wall ceramic wall tiles are digitally printed and fired as a standard glazed wall tile. Whilst every effort is made to maintain colour consistency some variation may occur during the manufacturing process. Graphic Wall ceramic wall tiles are made in the UK and consists of 27% recycled material. They are scratch, weather, fade / UV light resistant, making them suitable for almost any interior or exterior environment as a standard glazed wall, swimming pool or cladding tile.
All quoted sizes are modular, the physical dimensions are 3mm less than stated e.g. the 200x200mm tile is actually 197x197mm, this allows for a 3mm joint to be used, tiles should not be fit without a joint.
As Graphic Wall ceramic wall tiles are produced on a made-to-order basis we do not offer refunds. Items will only be replaced if they are damaged, customers must report damaged goods with 24 hours of receiving the items.
This item is shipped from United Kingdom to any of the countries listed below.
| Country |
Delivery Estimate |
Cost |
| United Kingdom | 1-2 working days | £ 15.00 |
| Europe | 3-5 working days | £ 62.55 |
| North America | 1-2 weeks | £ 99.30 |
| Australia | 1-2 weeks | £ 119.50 |
| Latin America | 1-2 weeks | £ 160.50 |
| Asia | 1-2 weeks | £ 160.50 |
| Africa | 1-2 weeks | £ 160.50 |
| Antarctica | 1-2 weeks | £ 160.50 |
